glowingseas

Menu
Menu

Power Up Your GlowingSeas Light with Confidence

Your GlowingSeas underwater LED fishing light is designed for quick and simple installation. Follow the instructions below based on the power system you are using to ensure safe operation and maximum performance.

Contact now

Power Up Your GlowingSeas Light with Confidence

Your GlowingSeas underwater LED fishing light is designed for quick and simple installation. Follow the instructions below based on the power system you are using to ensure safe operation and maximum performance.

Care Instructions

Keep Your Light Performing at Its Best

Routine maintenance helps maintain maximum brightness and extends the life of your underwater fishing light.

  • Remove the light every few weeks to one month for cleaning and inspection.
  • Gently scrub the housing using a soft brush or cloth.
  • Clean with mild solutions such as white vinegar or a small amount of bleach to remove algae buildup.
  • If barnacles develop, carefully remove them using a plastic scraper to avoid scratching the housing.
  • Inspect the light regularly for cracks, damage, or excessive wear before reinstalling.
Shop THE TECHNOLOGY

110V Installation

Simple Setup for Dock & Shoreline Applications

  1. Open the package and remove the 110V transformer included with your GlowingSeas light.
  2. Locate the two wires coming from the light. One wire is marked with white writing (Tracer)—this is the positive (+) lead.
  3. Before plugging the transformer into a power outlet, loosen the two screw terminals on the back of the transformer.
  4. Insert the light wires beneath the terminals and tighten the screws securely.
  5. Connect the wire with the white tracer to the positive (+) terminal.
  6. Plug the transformer into a properly grounded outdoor outlet. We strongly recommend using a GFCI-protected outlet for added safety.
  7. Turn the transformer on and cycle through the settings until the green ON indicator is illuminated. Your underwater light should now be operating.

12V Installation

Ideal for Boats, Docks & Portable Use

  1. Connect the red alligator clip to the positive (+) terminal of a 12V battery.
  2. Connect the remaining clip to the negative battery terminal.
  3. Only use a 12V power source. Connecting the light to a higher voltage may permanently damage the unit.
  4. Since the light is designed to float, attach a length of monofilament line to the collar and secure a weight to keep it suspended below the surface.
  5. Position the light approximately 18–24 inches below the water for maximum brightness and fish attraction.
  6. Keep the light away from boat traffic and propellers to prevent accidental damage, as impact damage is not covered under warranty.

Answers

Troubleshooting

If your GlowingSeas light isn’t performing as expected, don’t worry. Most common issues can be resolved with a few simple checks, such as verifying the power source, connections, or fuse. Use the troubleshooting guide below to quickly identify the problem and get your underwater fishing light back up and running.

If your light does not illuminate, check the following:

  • Ensure the 110V outlet has power.
  • Verify the transformer’s ON indicator is lit and switched to the ON position.
  • Confirm the 12V battery is fully charged and battery terminals are clean.
  • Inspect the inline fuse near the positive alligator clip (12V models).
  • Try reversing the power leads if necessary.

If you notice oil leaking from your light:

  • Stop using the light immediately.
  • Contact our support team for a replacement under warranty.

If the outer tube or housing becomes cracked:

  • Discontinue use immediately.
  • Contact GlowingSeas Customer Support for assistance.

Deployments

Built for every water on Earth.

From the flats of Louisiana to the trenches off Kona, our systems ship in configurations for every environment and application.

01

Sport Fishing

Trophy snook, tarpon, snapper

02

Offshore

Tuna, marlin, deep game

03

Inshore

Grass flats & backcountry

04

Commercial

Bait wells & long-line ops

05

Docks & Piers

Waterfront illumination

06

Marinas

Full harbor systems

07

Yachts

Underwater hull lighting

08

Waterfront Homes

Ambient private moorings

Warranty

Built to Last. Backed by Our Commitment.

Every GlowingSeas underwater fishing light is manufactured to the highest quality standards. To help us provide faster support and warranty service, please register your warranty card after purchase.

If your light experiences a manufacturing defect during the warranty period, our team will work with you to provide prompt support and replacement in accordance with our warranty policy.

We stand behind every product because we believe dependable equipment makes every fishing trip better.

Contact us
Scroll to Top